Circlips and Retaining Rings Index
Crescent Rings SSM: Metric Series
Crescent Rings: N1800 American Specification
Radially fitted circlips for shafts with grooves. Crescent Rings provide a shallow but uniform shoulder on relatively small shaft diameters. Higher resistance to thrust loads than standard 'E' type circlips. Neat appearance and suitable for applications where small clearance dimensions are important.
(Certain sizes are available in Stainless Steel)
| Standard material: Carbon Spring Steel Standard Finish: Phosphate and Oil. (Also available in Stainless Steel) | Measurements in mm & kN | ||||||||||||||
| Key to table headings and abbreviations | |||||||||||||||
| Shaft | Circlip Dimensions | Groove Dimensions | Code No. |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S | Tol | t | Tol | D | Tol | C | b | Fr kN |
G | Tol | W | Tol | n | Fr kN |
|
| 3 | +0.08 -0.00 |
0.40 | +0.00 -0.05 |
2.18 | ±0.06 | 4.1 | 0.90 | 0.50 | 2.3 | +0.00 -0.07 |
0.44 | +0.05 -0.00 |
1.0 | 0.24 | SSM0030 |
| 4 | 0.40 | 3.00 | 5.2 | 1.00 | 0.50 | 3.2 | 0.44 | 1.2 | 0.37 | SSM0040 | |||||
| 5 | +0.10 -0.00 |
0.60 | 3.80 | ±0.08 | 6.4 | 1.20 | 1.10 | 4.0 | 0.64 | +0.08 -0.00 |
1.5 | 0.58 | SSM0050 | ||
| 6 | 0.70 | 4.80 | 7.6 | 1.30 | 1.65 | 5.0 | 0.74 | 1.5 | 0.72 | SSM0060 | |||||
| 7 | 0.80 | 5.80 | 8.8 | 1.40 | 2.20 | 6.0 | +0.00 -0.09 |
0.85 | 1.5 | 0.85 | SSM0070 | ||||
| 8 | 0.80 | 6.80 | ±0.09 | 10.2 | 1.60 | 2.20 | 7.0 | 0.85 | 1.5 | 0.98 | SSM0080 | ||||
| 9 | 1.00 | +0.00 -0.06 |
7.80 | 11.4 | 1.70 | 3.50 | 8.0 | 1.10 | 1.5 | 1.10 | SSM0090 | ||||
| 10 | 1.00 | 8.75 | 12.4 | 1.70 | 3.70 | 9.0 | 1.10 | 1.5 | 1.24 | SSM0100 | |||||
| 11 | 1.00 | 9.65 | ±0.18 | 13.6 | 1.80 | 4.00 | 10.0 | +0.00 -0.11 |
1.10 | 1.5 | 1.35 | SSM0110 | |||
| 12 | +0.15 -0.00 |
1.00 | 10.55 | 14.7 | 1.90 | 4.20 | 10.9 | 1.10 | 1.7 | 1.65 | SSM0120 | ||||
| 13 | 1.00 | 11.40 | 15.8 | 2.00 | 4.50 | 11.8 | 1.10 | 1.8 | 1.90 | SSM0130 | |||||
| 14 | 1.00 | 12.30 | 16.7 | 2.00 | 5.00 | 12.7 | 1.10 | 2.0 | 2.20 | SSM0140 | |||||
| 15 | 1.00 | 13.20 | 17.8 | 2.10 | 5.50 | 13.6 | 1.10 | 2.1 | 2.60 | SSM0150 | |||||
| 16 | 1.00 | 14.10 | 18.9 | 2.20 | 5.80 | 14.5 | 1.10 | 2.3 | 3.00 | SSM0160 | |||||
| 17 | 1.00 | 14.90 | 19.9 | 2.25 | 6.00 | 15.4 | 1.10 | 2.4 | 3.40 | SSM0170 | |||||
| 18 | 1.20 | 15.80 | 20.9 | 2.30 | 8.50 | 16.3 | 1.30 | +0.15 -0.00 |
2.6 | 3.70 | SSM0180 | ||||
| 19 | 1.20 | 16.70 | 22.0 | 2.40 | 9.00 | 17.2 | 1.30 | 2.7 | 4.30 | SSM0190 | |||||
| 20 | 1.20 | 17.55 | 23.2 | 2.55 | 9.40 | 18.1 | +0.00 -0.21 |
1.30 | 2.9 | 4.70 | SSM0200 | ||||
| 22 | 1.20 | 19.40 | ±0.21 | 25.2 | 2.80 | 10.00 | 19.9 | 1.30 | 3.2 | 5.70 | SSM0220 | ||||
| 23 | 1.20 | 20.20 | 26.6 | 2.90 | 10.50 | 20.8 | 1.30 | 3.3 | 6.20 | SSM0230 | |||||
| 24 | 1.20 | 21.10 | 27.7 | 3.00 | 11.00 | 21.7 | 1.30 | 3.5 | 6.80 | SSM0240 | |||||
| 25 | 1.20 | 22.00 | 28.9 | 3.15 | 11.50 | 22.6 | 1.30 | 3.6 | 7.50 | SSM0250 | |||||
| 26 | +0.20 -0.00 |
1.20 | 22.90 | 30.0 | 3.25 | 12.00 | 23.5 | 1.30 | 3.8 | 8.00 | SSM0260 | ||||
| 28 | 1.50 | 24.60 | 32.2 | 3.50 | 16.50 | 25.2 | 1.60 | 4.2 | 9.70 | SSM0280 | |||||
| 30 | 1.50 | 26.30 | 34.4 | 3.70 | 17.00 | 27.0 | 1.60 | 4.5 | 11.00 | SSM0300 | |||||
Circlips and Retaining Rings Index | Contact Springmasters with your specifications.
