Circlips and Retaining Rings Index
Standard Internal Circlips: To DIN 472 Metric
Standard Internal Circlips: N1300 American Specification
The most common form of axially fitted circlips for bores with grooves.
The circlip has a large free diameter and gap width, consequently it fits more tightly into the groove and provides higher and more uniform thrust load capacity. Lugs with holes are provided for rapid fitting or removal with circlip pliers.
Standard material: Carbon Spring Steel - Standard Finish: Phosphate and Oil.
(Standard circlips are also available in Stainless Steel)
| Most sizes over 170mm are without lugs | Measurements in mm & kN | ||||||||||||||
| Key to table headings and abbreviations | |||||||||||||||
| Bore B |
Circlip Dimensions | Groove Dimensions | Code No. |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| t | Tol | D | Tol | Cb | b | L | h | Fr kN |
G | Tol | W | n | Fr kN |
||
| 8 | 0.80 | +0.00 -0.50 |
8.7 | +0.36 -0.10 |
3.0 | 1.1 | 2.4 | 1.0 | 2.0 | 8.4 | +0.09 -0.00 |
0.90 | 0.6 | 0.86 | INT0080 |
| 9 | 0.80 | 9.8 | 3.7 | 1.3 | 2.5 | 1.0 | 2.0 | 9.4 | 0.90 | 0.6 | 0.96 | INT0090 | |||
| 10 | 1.00 | +0.00 -0.06 |
10.8 | 3.3 | 1.4 | 3.2 | 1.2 | 4.0 | 10.4 | +0.11 -0.00 |
1.10 | 0.6 | 1.08 | INT0100 | |
| 11 | 1.00 | 11.8 | 4.1 | 1.5 | 3.3 | 1.2 | 4.0 | 11.4 | 1.10 | 0.6 | 1.17 | INT0110 | |||
| 12 | 1.00 | 13.0 | 4.9 | 1.7 | 3.4 | 1.5 | 4.0 | 12.5 | 1.10 | 0.8 | 1.6 | INT0120 | |||
| 13 | 1.00 | 14.1 | 5.4 | 1.8 | 3.6 | 1.5 | 4.2 | 13.6 | 1.10 | 0.9 | 2.1 | INT0130 | |||
| 14 | 1.00 | 15.1 | 6.2 | 1.9 | 3.7 | 1.7 | 4.5 | 14.6 | 1.10 | 0.9 | 2.25 | INT0140 | |||
| 15 | 1.00 | 16.2 | 7.2 | 2.0 | 3.7 | 1.7 | 5.0 | 15.7 | 1.10 | 1.1 | 2.8 | INT0150 | |||
| 16 | 1.00 | 17.3 | 8.0 | 2.0 | 3.8 | 1.7 | 5.5 | 16.8 | 1.10 | 1.2 | 3.4 | INT0160 | |||
| 17 | 1.00 | 18.3 | +0.42 -0.13 |
8.8 | 2.1 | 3.9 | 1.7 | 6.0 | 17.8 | 1.10 | 1.2 | 3.6 | INT0170 | ||
| 18 | 1.00 | 19.5 | 9.4 | 2.2 | 4.1 | 2.0 | 6.5 | 19.0 | +0.13 -0.00 |
1.10 | 1.5 | 4.8 | INT0180 | ||
| 19 | 1.00 | 20.5 | 10.4 | 2.2 | 4.1 | 2.0 | 6.8 | 20.0 | 1.10 | 1.5 | 5.1 | INT0190 | |||
| 20 | 1.00 | 21.5 | 11.2 | 2.3 | 4.2 | 2.0 | 7.2 | 21.0 | 1.10 | 1.5 | 5.4 | INT0200 | |||
| 21 | 1.00 | 22.5 | 12.2 | 2.4 | 4.2 | 2.0 | 7.6 | 22.0 | 1.10 | 1.5 | 5.7 | INT0210 | |||
| 22 | 1.00 | 23.5 | 13.2 | 2.5 | 4.2 | 2.0 | 8.0 | 23.0 | 1.10 | 1.5 | 5.9 | INT0220 | |||
| 23 | 1.20 | 24.6 | +0.42 -0.21 |
14.2 | 2.5 | 4.2 | 2.0 | 13.8 | 24.1 | 1.30 | 1.5 | 6.8 | INT0230 | ||
| 24 | 1.20 | 25.9 | 14.8 | 2.6 | 4.4 | 2.0 | 13.9 | 25.2 | +0.21 -0.00 |
1.30 | 1.8 | 7.7 | INT0240 | ||
| 25 | 1.20 | 26.9 | 15.5 | 2.7 | 4.5 | 2.0 | 14.6 | 26.2 | 1.30 | 1.8 | 8.0 | INT0250 | |||
| 26 | 1.20 | 27.9 | 16.1 | 2.8 | 4.7 | 2.0 | 13.85 | 27.2 | 1.30 | 1.8 | 8.4 | INT0260 | |||
| 27 | 1.20 | 29.1 | 17.1 | 2.9 | 4.7 | 2.0 | 13.3 | 28.4 | 1.30 | 2.1 | 10.1 | INT0270 | |||
| 28 | 1.20 | 30.1 | +0.50 -0.25 |
17.9 | 2.9 | 4.8 | 2.0 | 13.3 | 29.4 | 1.30 | 2.1 | 10.5 | INT0280 | ||
| 29 | 1.20 | 31.1 | 18.4 | 3.0 | 4.8 | 2.0 | 13.6 | 30.4 | +0.25 -0.00 |
1.30 | 2.1 | 10.9 | INT0290 | ||
| 30 | 1.20 | 32.1 | 19.9 | 3.0 | 4.8 | 2.0 | 13.7 | 31.4 | 1.30 | 2.1 | 11.3 | INT0300 | |||
| 31 | 1.20 | 33.4 | 20.0 | 3.2 | 5.2 | 2.5 | 13.8 | 32.7 | 1.30 | 2.6 | 14.1 | INT0310 | |||
| 32 | 1.20 | 34.4 | 20.6 | 3.2 | 5.4 | 2.5 | 13.8 | 33.7 | 1.30 | 2.6 | 14.6 | INT0320 | |||
| 33 | 1.20 | 35.5 | 21.6 | 3.3 | 5.4 | 2.5 | 14.3 | 34.7 | 1.30 | 2.6 | 15.0 | INT0330 | |||
| 34 | 1.50 | 36.5 | 22.6 | 3.3 | 5.4 | 2.5 | 26.2 | 35.7 | 1.60 | 2.6 | 15.4 | INT0340 | |||
| 35 | 1.50 | 37.8 | 23.6 | 3.4 | 5.4 | 2.5 | 26.9 | 37.0 | 1.60 | 3.0 | 18.8 | INT0350 | |||
| 36 | 1.50 | 38.8 | 24.6 | 3.5 | 5.4 | 2.5 | 26.4 | 38.0 | 1.60 | 3.0 | 19.4 | INT0360 | |||
| 37 | 1.50 | 39.8 | 25.4 | 3.6 | 5.5 | 2.5 | 27.1 | 39.0 | 1.60 | 3.0 | 19.8 | INT0370 | |||
| 38 | 1.50 | 40.8 | 26.4 | 3.7 | 5.5 | 2.5 | 28.2 | 40.0 | 1.60 | 3.0 | 22.5 | INT0380 | |||
| 39 | 1.50 | 42.0 | +0.90 -0.39 |
27.2 | 3.8 | 5.6 | 2.5 | 28.8 | 41.0 | 1.60 | 3.0 | 26.0 | INT0390 | ||
| 40 | 1.75 | 43.5 | 27.8 | 3.9 | 5.8 | 2.5 | 44.6 | 42.5 | 1.85 | 3.8 | 27.0 | INT0400 | |||
| 41 | 1.75 | 44.5 | 28.6 | 4.0 | 5.9 | 2.5 | 45.0 | 43.5 | 1.85 | 3.8 | 27.6 | INT0410 | |||
| 42 | 1.75 | 45.5 | 29.6 | 4.1 | 5.9 | 2.5 | 44.7 | 44.5 | 1.85 | 3.8 | 28.4 | INT0420 | |||
| 43 | 1.75 | 46.5 | 30.6 | 4.2 | 5.9 | 2.5 | 44.5 | 45.5 | 1.85 | 3.8 | 28.8 | INT0430 | |||
| 44 | 1.75 | 47.5 | 31.4 | 4.2 | 6.0 | 2.5 | 43.3 | 46.5 | 1.85 | 3.8 | 29.5 | INT0440 | |||
| 45 | 1.75 | 48.5 | 32.0 | 4.3 | 6.2 | 2.5 | 43.1 | 47.5 | 1.85 | 3.8 | 30.2 | INT0450 | |||
| 46 | 1.75 | 49.5 | 32.7 | 4.4 | 6.3 | 2.5 | 42.9 | 48.5 | 1.85 | 3.8 | 30.8 | INT0460 | |||
| 47 | 1.75 | 50.5 | +1.10 -0.46 |
33.5 | 4.4 | 6.4 | 2.5 | 43.5 | 49.5 | 1.85 | 3.8 | 31.4 | INT0470 | ||
| 48 | 1.75 | 51.5 | 34.5 | 4.5 | 6.4 | 2.5 | 43.2 | 50.5 | +0.30 -0.00 |
1.85 | 3.8 | 32.0 | INT0480 | ||
| 50 | 2.00 | +0.00 -0.07 |
54.2 | 36.3 | 4.6 | 6.5 | 2.5 | 60.8 | 53.0 | 2.15 | 4.5 | 40.5 | INT0500 | ||
| 51 | 2.00 | 55.2 | 37.3 | 4.7 | 6.5 | 2.5 | 60.2 | 54.0 | 2.15 | 4.5 | 41.2 | INT0510 | |||
| 52 | 2.00 | 56.2 | 37.9 | 4.7 | 6.7 | 2.5 | 60.25 | 55.0 | 2.15 | 4.5 | 42.0 | INT0520 | |||
| 53 | 2.00 | 57.2 | 38.9 | 4.9 | 6.7 | 2.5 | 60.7 | 56.0 | 2.15 | 4.5 | 42.9 | INT0530 | |||
| 54 | 2.00 | 58.2 | 39.9 | 5.0 | 6.7 | 2.5 | 60.4 | 57.0 | 2.15 | 4.5 | 43.6 | INT0540 | |||
| Most sizes over 170mm are without lugs | Measurements in mm & kN | ||||||||||||||
| Key to table headings and abbreviations | |||||||||||||||
| Bore B |
Circlip Dimensions | Groove Dimensions | Code No. |
||||||||||||
| t | Tol | D | Tol | Cb | b | L | h | Fr kN |
G | Tol | W | n | Fr kN |
||
| 55 | 2.00 | +0.00 -0.07 |
59.2 | +1.10 -0.46 |
40.7 | 5.0 | 6.8 | 2.5 | 60.3 | 58.0 | +0.30 -0.00 |
2.15 | 4.5 | 44.4 | INT0550 |
| 56 | 2.00 | 60.2 | 41.7 | 5.1 | 6.8 | 2.5 | 60.3 | 59.0 | 2.15 | 4.5 | 45.2 | INT0560 | |||
| 57 | 2.00 | 61.2 | 42.7 | 5.1 | 6.8 | 2.5 | 60.8 | 60.0 | 2.15 | 4.5 | 46.0 | INT0570 | |||
| 58 | 2.00 | 62.2 | 43.5 | 5.2 | 6.9 | 2.5 | 60.8 | 61.0 | 2.15 | 4.5 | 46.7 | INT0580 | |||
| 60 | 2.00 | 64.2 | 44.7 | 5.4 | 7.3 | 2.5 | 61.0 | 63.0 | 2.15 | 4.5 | 48.3 | INT0600 | |||
| 62 | 2.00 | 66.2 | 46.7 | 5.5 | 7.3 | 2.5 | 60.9 | 65.0 | 2.15 | 4.5 | 49.8 | INT0620 | |||
| 63 | 2.00 | 67.2 | 47.7 | 5.6 | 7.3 | 2.5 | 60.8 | 66.0 | 2.15 | 4.5 | 50.6 | INT0630 | |||
| 64 | 2.00 | 68.2 | 48.2 | 5.7 | 7.5 | 2.5 | 60.6 | 67.0 | 2.15 | 4.5 | 51.4 | INT0640 | |||
| 65 | 2.50 | 69.2 | 49.0 | 5.8 | 7.6 | 3.0 | 121.0 | 68.0 | 2.65 | 4.5 | 51.8 | INT0650 | |||
| 67 | 2.50 | 71.5 | 50.8 | 6.0 | 7.7 | 3.0 | 121.0 | 70.0 | 2.65 | 4.5 | 53.8 | INT0670 | |||
| 68 | 2.50 | 72.5 | 51.6 | 6.1 | 7.8 | 3.0 | 121.5 | 71.0 | 2.65 | 4.5 | 54.5 | INT0680 | |||
| 70 | 2.50 | 74.5 | 53.6 | 6.2 | 7.8 | 3.0 | 119.0 | 73.0 | 2.65 | 4.5 | 56.2 | INT0700 | |||
| 72 | 2.50 | 76.5 | 55.6 | 6.4 | 7.8 | 3.0 | 119.2 | 75.0 | 2.65 | 4.5 | 58.0 | INT0720 | |||
| 75 | 2.50 | 79.5 | 58.6 | 6.6 | 7.8 | 3.0 | 118.0 | 78.0 | 2.65 | 4.5 | 60.0 | INT0750 | |||
| 77 | 2.50 | 81.5 | 60.4 | 6.7 | 7.9 | 3.0 | 121.1 | 80.0 | 2.65 | 4.5 | 61.6 | INT0770 | |||
| 78 | 2.50 | 82.5 | +1.30 -0.54 |
60.1 | 6.8 | 8.5 | 3.0 | 122.5 | 81.0 | +0.35 -0.00 |
2.65 | 4.5 | 62.3 | INT0780 | |
| 80 | 2.50 | 85.5 | 62.1 | 7.0 | 8.5 | 3.0 | 120.9 | 83.5 | 2.65 | 5.3 | 74.6 | INT0800 | |||
| 82 | 2.50 | 87.5 | 64.1 | 7.0 | 8.5 | 3.0 | 119.0 | 85.5 | 2.65 | 5.3 | 76.6 | INT0820 | |||
| 85 | 3.00 | +0.00 -0.08 |
90.5 | 66.9 | 7.2 | 8.6 | 3.5 | 201.4 | 88.5 | 3.15 | 5.3 | 79.5 | INT0850 | ||
| 87 | 3.00 | 92.5 | 68.9 | 7.3 | 8.6 | 3.5 | 204.5 | 90.5 | 3.15 | 5.3 | 81.3 | INT0870 | |||
| 88 | 3.00 | 93.5 | 69.9 | 7.4 | 8.6 | 3.5 | 209.4 | 91.5 | 3.15 | 5.3 | 82.1 | INT0880 | |||
| 90 | 3.00 | 95.5 | 71.9 | 7.6 | 8.6 | 3.5 | 199.0 | 93.5 | 3.15 | 5.3 | 84.0 | INT0900 | |||
| 92 | 3.00 | 97.5 | 73.7 | 7.8 | 8.7 | 3.5 | 201.0 | 95.5 | 3.15 | 5.3 | 85.8 | INT0920 | |||
| 95 | 3.00 | 100.5 | 76.5 | 8.1 | 8.8 | 3.5 | 195.0 | 98.5 | 3.15 | 5.3 | 88.6 | INT0950 | |||
| 97 | 3.00 | 102.5 | 78.5 | 8.2 | 8.8 | 3.5 | 193.0 | 100.5 | 3.15 | 5.3 | 90.5 | INT0970 | |||
| 98 | 3.00 | 103.5 | 79.0 | 8.3 | 9.0 | 3.5 | 191.0 | 101.5 | 3.15 | 5.3 | 91.3 | INT0980 | |||
| 100 | 3.00 | 105.5 | 80.6 | 8.4 | 9.2 | 3.5 | 188.0 | 103.5 | 3.15 | 5.3 | 93.1 | INT1000 | |||
| 102 | 4.00 | +0.00 -0.10 |
108.0 | 82.0 | 8.5 | 9.5 | 3.5 | 439.0 | 106.0 | +0.54 -0.00 |
4.15 | 6.0 | 108.8 | INT1020 | |
| 105 | 4.00 | 112.0 | 85.0 | 8.7 | 9.5 | 3.5 | 436.0 | 109.0 | 4.15 | 6.0 | 112.0 | INT1050 | |||
| 108 | 4.00 | 115.0 | 88.0 | 8.9 | 9.5 | 3.5 | 419.0 | 112.0 | 4.15 | 6.0 | 115.0 | INT1080 | |||
| 110 | 4.00 | 117.0 | 88.2 | 9.0 | 10.4 | 3.5 | 415.0 | 114.0 | 4.15 | 6.0 | 117.0 | INT1100 | |||
| 112 | 4.00 | 119.0 | 90.0 | 9.1 | 10.5 | 3.5 | 418.0 | 116.0 | 4.15 | 6.0 | 119.0 | INT1120 | |||
| 115 | 4.00 | 122.0 | +1.50 -0.63 |
93.0 | 9.3 | 10.5 | 3.5 | 409.0 | 119.0 | 4.15 | 6.0 | 122.0 | INT1150 | ||
| 120 | 4.00 | 127.0 | 96.9 | 9.7 | 11.0 | 3.5 | 396.0 | 124.0 | +0.63 -0.00 |
4.15 | 6.0 | 127.0 | INT1200 | ||
| 125 | 4.00 | 132.0 | 101.9 | 10.0 | 11.0 | 4.0 | 385.0 | 129.0 | 4.15 | 6.0 | 132.0 | INT1250 | |||
| 130 | 4.00 | 137.0 | 106.9 | 10.2 | 11.0 | 4.0 | 374.0 | 134.0 | 4.15 | 6.0 | 138.0 | INT1300 | |||
| 135 | 4.00 | 142.0 | 111.5 | 10.5 | 11.2 | 4.0 | 358.0 | 139.0 | 4.15 | 6.0 | 143.0 | INT1350 | |||
| 140 | 4.00 | 147.0 | 116.5 | 10.7 | 11.2 | 4.0 | 350.0 | 144.0 | 4.15 | 6.0 | 148.0 | INT1400 | |||
| 145 | 4.00 | 152.0 | 121.0 | 10.9 | 11.4 | 4.0 | 336.0 | 149.0 | 4.15 | 6.0 | 153.0 | INT1450 | |||
| 150 | 4.00 | 158.0 | 124.8 | 11.2 | 12.0 | 4.0 | 326.0 | 155.0 | 4.15 | 7.5 | 191.0 | INT1500 | |||
| 155 | 4.00 | 164.0 | 129.8 | 11.4 | 12.0 | 4.0 | 324.0 | 160.0 | 4.15 | 7.5 | 206.0 | INT1550 | |||
| 160 | 4.00 | 169.0 | 132.7 | 11.6 | 13.0 | 4.0 | 321.0 | 165.0 | 4.15 | 7.5 | 212.0 | INT1600 | |||
| 165 | 4.00 | 174.5 | 137.7 | 11.8 | 13.0 | 4.0 | 319.0 | 170.0 | 4.15 | 7.5 | 219.0 | INT1650 | |||
| 170 | 4.00 | 179.5 | 141.6 | 12.2 | 13.5 | 4.0 | 349.0 | 175.0 | 4.15 | 7.5 | 225.0 | INT1700 | |||
| 175 | 4.00 | 184.5 | +1.70 -0.72 |
146.6 | 12.7 | 13.5 | 4.0 | 351.0 | 180.0 | 4.15 | 7.5 | 232.0 | INT1750 | ||
| 180 | 4.00 | 189.5 | 150.2 | 13.2 | 14.2 | 4.0 | 347.0 | 185.0 | +0.72 -0.00 |
4.15 | 7.5 | 238.0 | INT1800 | ||
| 185 | 4.00 | 194.5 | 155.2 | 13.7 | 14.2 | 4.0 | 349.0 | 190.0 | 4.15 | 7.5 | 245.0 | INT1850 | |||
| 190 | 4.00 | 199.5 | 160.2 | 13.8 | 14.2 | 4.0 | 340.0 | 195.0 | 4.15 | 7.5 | 251.0 | INT1900 | |||
| 195 | 4.00 | 204.5 | 165.2 | 13.8 | 14.2 | 4.0 | 330.0 | 200.0 | 4.15 | 7.5 | 258.0 | INT1950 | |||
| 200 | 4.00 | 209.5 | 170.2 | 14.0 | 14.2 | 4.0 | 325.0 | 205.0 | 4.15 | 7.5 | 265.0 | INT2000 | |||
| Most sizes over 170mm are without lugs | Measurements in mm & kN | ||||||||||||||
| Key to table headings and abbreviations | |||||||||||||||
| Bore B |
Circlip Dimensions | Groove Dimensions | Code No. |
||||||||||||
| t | Tol | D | Tol | Cb | b | L | h | Fr kN |
G | Tol | W | n | Fr kN |
||
| 205 | 5.00 | +0.00 -0.12 |
217.0 | +1.70 -0.72 |
175.2 | 14.0 | 14.2 | 4.0 | 616.0 | 211.0 | +0.72 -0.00 |
5.15 | 9.0 | 326.0 | INT2050 |
| 210 | 5.00 | 222.0 | 180.2 | 14.0 | 14.2 | 4.0 | 601.0 | 216.0 | 5.15 | 9.0 | 333.0 | INT2100 | |||
| 215 | 5.00 | 227.0 | 185.2 | 14.0 | 14.2 | 4.0 | 586.0 | 221.0 | 5.15 | 9.0 | 341.0 | INT2150 | |||
| 220 | 5.00 | 232.0 | 190.2 | 14.0 | 14.2 | 4.0 | 574.0 | 226.0 | 5.15 | 9.0 | 349.0 | INT2200 | |||
| 225 | 5.00 | 237.0 | 195.2 | 14.0 | 14.2 | 4.0 | 560.0 | 231.0 | 5.15 | 9.0 | 357.0 | INT2250 | |||
| 230 | 5.00 | 242.0 | 200.2 | 14.0 | 14.2 | 4.0 | 549.0 | 236.0 | 5.15 | 9.0 | 365.0 | INT2300 | |||
| 235 | 5.00 | 247.0 | 205.2 | 14.0 | 14.2 | 4.0 | 536.0 | 241.0 | 5.15 | 9.0 | 373.0 | INT2350 | |||
| 240 | 5.00 | 252.0 | +2.00 -0.81 |
210.2 | 14.0 | 14.2 | 4.0 | 525.0 | 246.0 | 5.15 | 9.0 | 380.0 | INT2400 | ||
| 245 | 5.00 | 257.0 | 215.2 | 14.0 | 14.2 | 4.0 | 514.0 | 251.0 | +0.81 -0.00 |
5.15 | 9.0 | 389.0 | INT2450 | ||
| 250 | 5.00 | 262.0 | 220.2 | 14.0 | 14.2 | 4.0 | 504.0 | 256.0 | 5.15 | 9.0 | 396.0 | INT2500 | |||
| 255 | 5.00 | 270.0 | 221.0 | 16.0 | 16.2 | 5.0 | 549.0 | 263.0 | 5.15 | 12.0 | 541.0 | INT2550 | |||
| 260 | 5.00 | 275.0 | 226.0 | 16.0 | 16.2 | 5.0 | 538.0 | 268.0 | 5.15 | 12.0 | 553.0 | INT2600 | |||
| 265 | 5.00 | 280.0 | 231.0 | 16.0 | 16.2 | 5.0 | 528.0 | 273.0 | 5.15 | 12.0 | 563.0 | INT2650 | |||
| 270 | 5.00 | 285.0 | 236.0 | 16.0 | 16.2 | 5.0 | 518.0 | 278.0 | 5.15 | 12.0 | 573.0 | INT2700 | |||
| 275 | 5.00 | 290.0 | 241.0 | 16.0 | 16.2 | 5.0 | 509.0 | 283.0 | 5.15 | 12.0 | 585.0 | INT2750 | |||
| 280 | 5.00 | 295.0 | 246.0 | 16.0 | 16.2 | 5.0 | 499.0 | 288.0 | 5.15 | 12.0 | 593.0 | INT2800 | |||
| 285 | 5.00 | 300.0 | 251.0 | 16.0 | 16.2 | 5.0 | 491.0 | 293.0 | 5.15 | 12.0 | 605.0 | INT2850 | |||
| 290 | 5.00 | 305.0 | 256.0 | 16.0 | 16.2 | 5.0 | 482.0 | 298.0 | 5.15 | 12.0 | 615.0 | INT2900 | |||
| 295 | 5.00 | 310.0 | 261.0 | 16.0 | 16.2 | 5.0 | 474.0 | 303.0 | 5.15 | 12.0 | 625.0 | INT2950 | |||
| 300 | 5.00 | 315.0 | 266.0 | 16.0 | 16.2 | 5.0 | 466.0 | 308.0 | 5.15 | 12.0 | 636.0 | INT3000 | |||
| 310 | 6.00 | +0.00 -0.18 |
327.0 | +2.50 -1.00 |
268.0 | 20.0 | 20.2 | 6.0 | 947.0 | 320.0 | +0.89 -0.00 |
6.20 | 15.0 | 823.0 | INT3100 |
| 320 | 6.00 | 337.0 | 278.0 | 20.0 | 20.2 | 6.0 | 919.0 | 330.0 | 6.20 | 15.0 | 850.0 | INT3200 | |||
| 330 | 6.00 | 347.0 | 288.0 | 20.0 | 20.2 | 6.0 | 894.0 | 340.0 | 6.20 | 15.0 | 876.0 | INT3300 | |||
| 340 | 6.00 | 357.0 | 298.0 | 20.0 | 20.2 | 6.0 | 869.0 | 350.0 | 6.20 | 15.0 | 903.0 | INT3400 | |||
| 350 | 6.00 | 367.0 | 308.0 | 20.0 | 20.2 | 6.0 | 846.0 | 360.0 | 6.20 | 15.0 | 929.0 | INT3500 | |||
| 360 | 6.00 | 377.0 | 318.0 | 20.0 | 20.2 | 6.0 | 823.0 | 370.0 | 6.20 | 15.0 | 955.0 | INT3600 | |||
| 370 | 6.00 | 387.0 | 328.0 | 20.0 | 20.2 | 6.0 | 803.0 | 380.0 | 6.20 | 15.0 | 981.0 | INT3700 | |||
| 380 | 6.00 | 397.0 | 338.0 | 20.0 | 20.2 | 6.0 | 784.0 | 390.0 | 6.20 | 15.0 | 1008.0 | INT3800 | |||
| 390 | 6.00 | 407.0 | 348.0 | 20.0 | 20.2 | 6.0 | 764.0 | 400.0 | 6.20 | 15.0 | 1033.0 | INT3900 | |||
| 400 | 6.00 | 417.0 | 358.0 | 20.0 | 20.2 | 6.0 | 746.0 | 410.0 | +1.00 -0.00 |
6.20 | 15.0 | 1060.0 | INT4000 | ||
Circlips and Retaining Rings Index | Contact Springmasters with your specifications.
