Circlips and Retaining Rings Index
'U' Type Circlips: Metric
Radially fitted 'U' type circlips for shafts with grooves. Average axial loading capacity. Easy to remove manually or with make-shift tools.
Standard material: Carbon Spring Steel - Standard Finish: Phosphate and Oil
| Key to table headings and abbreviations | Measurements in millimetres (mm) | |||||||
| For Shafts | Circlip Dimensions | Code No. | ||||||
|---|---|---|---|---|---|---|---|---|
| From | To | t | Tol | D | C | G | W | |
| 2.4 | 3.2 | 0.5 | ±0.03 | 1.02 | 7.8 | 1.42 | 0.58 | U056 |
| 2.7 | 3.2 | 1.42 | 8.9 | 2.00 | U078 | |||
| 3.2 | 4.8 | 1.68 | 10.8 | 2.35 | U093 | |||
| 3.2 | 3.6 | 1.80 | 11.2 | 2.40 | U095 | |||
| 3.6 | 4.0 | 1.98 | 12.9 | 2.54 | U100 | |||
| 4.0 | 4.8 | 2.41 | 12.9 | 3.15 | U124 | |||
| 4.0 | 4.8 | 2.45 | 11.3 | 3.18 | U125 | |||
| 4.4 | 5.2 | 2.80 | 13.3 | 3.55 | U140 | |||
| 4.8 | 5.6 | 3.24 | 11.3 | 3.84 | U153 | |||
| 4.8 | 6.0 | 3.12 | 13.5 | 3.94 | U155 | |||
| 6.4 | 8.0 | 3.76 | 17.7 | 4.75 | U187 | |||
| 8.0 | 9.5 | 5.22 | 17.7 | 6.35 | U250 | |||
| 8.7 | 9.5 | 6.38 | 20.0 | 7.14 | U281 | |||
| 9.5 | 11.0 | 6.68 | 19.3 | 7.90 | U311 | |||
| 11.0 | 12.7 | 8.28 | 23.2 | 9.50 | U374 | |||
| 12.7 | 14.5 | 9.84 | 26.4 | 11.10 | U438 | |||
| 14.5 | 16.0 | 11.44 | 28.8 | 12.70 | U500 | |||
| 16.0 | 18.0 | 13.32 | 28.8 | 14.40 | U567 | |||
Circlips and Retaining Rings Index | Contact Springmasters with your specifications.
