Circlips and Retaining Rings

Product Order Line:
01527 521000

Credit Cards Accepted

Circlips and Retaining Rings Index

Heavy Duty External Circlips: N1460 American

Photo of heavy duty external circlip Drawing of heavy duty external circlips American specification N1460

Design is based upon the standard external series but with increased thickness and increased section depth. Heavy duty Circlips are used to withstand shock loads and also to resist conical deformation where, for example, large abutment radii are present.

Standard material: Carbon Spring Steel - Standard Finish: Phosphate and Oil.

Product Order Line: 01527 521000
Springmasters takes credit card payments

Minimum order charge for UK & Rep. of Ireland customers: Orders are subject to a minimum charge of £15 plus carriage, packing & VAT. Minimum order per item £2.50.

Minimum order charge for Overseas customers: Orders are subject to a minimum order charge of £50 Pound Sterling ($100 US Dollars) on an ex-works basis.

Use your keyboard keys Ctrl + F to find your part number in this page.

Please prefix code numbers with N1460/Measurements in inches & lb.f
Key to table headings and abbreviations
Shaft Circlip Dimensions Groove Dimensions Code
No.
N1460/
t Tol D Tol Cs b L h Fr
kN
G Tol W Tol n Fr
kN
1/2 .050 +.002
-.002
.460 +.005
-.010
.75 .090 .124 .048 3500 .468 +.001
-.002
.056 +.004
-.000
.048 450 0050
.591 .050 .543 .86 .104 .134 .048 4180 .555 .056 .054 600 0059
5/8 .050 .575 .90 .106 .134 .048 4420 .588 +.001
-.003
.056 .057 670 0062
.669 .050 .616 .94 .114 .134 .048 4730 .629 .056 .060 750 0066
3/4 .078 +.003
-.003
.689 1.12 .127 .185 .076 8270 .704 .086 +.005
-.000
.069 975 0075
7/8 .078 .804 1.25 .148 .185 .076 9650 .821 .086 .081 1330 0087
63/64 .078 .906 1.36 .156 .185 .076 10800 .925 .086 .090 1670 0098
1 .078 .906 +.010
-.015
1.37 .156 .185 .076 11000 .938 +.002
-.004
.086 .093 1750 0098
1 1/16 .093 .978 1.52 .163 .225 .091 14000 .998 .103 .096 1920 0106
1 1/8 .093 1.036 1.58 .175 .225 .091 14800 1.059 .103 .099 2100 0112
1.181 .093 1.087 1.64 .176 .225 .091 15500 1.111 .103 .105 2340 0118
1 1/4 .093 1.150 1.70 .185 .225 .091 16400 1.174 .103 .114 2690 0125
1 5/16 .093 1.208 1.77 .196 .225 .091 17200 1.234 .103 .117 2890 0131
1 3/8 .093 1.268 1.83 .200 .225 .091 18000 1.291 .103 .126 3260 0137
1 1/2 .109 1.380 1.94 .205 .215 .107 19000 1.406 .120 .141 3990 0150
1 5/8 .109 1.437 +.013
-.020
2.00 .205 .215 .098 20000 1.468 +.003
-.004
.120 .141 4150 0156
1 3/4 .109 1.608 2.18 .205 .215 .098 22500 1.650 .120 .150 4950 0175
1 15/16 .125 +.004
-.004
1.782 2.47 .256 .264 .123 28500 1.826 .139 +.006
-.000
.178 6140 0193
2 .125 1.840 2.53 .256 .265 .123 29500 1.880 .139 .180 6780 0200

Circlips and Retaining Rings Index | Contact Springmasters with your specifications.