Circlips and Retaining Rings Index
External Circlips with Increased Abutment to DIN 983 - Metric
Axially fitted circlips for shafts with grooves. Similar in design to Din 471 Standard Circlips, but with additional lugs evenly distributed around the circumference.
This is especially useful for maintaining good contact with radiused or chamfered components. High axial loading capacity.
| Standard material: Carbon Spring Steel Standard Finish: Phosphate and Oil. | Measurements in mm & kN | ||||||||||||||
| Key to table headings and abbreviations | |||||||||||||||
| Shaft | Circlip Dimensions | Groove Dimensions | Code No. |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| t | Tol | D | Tol | Cs | b | L | h | Fr kN |
G | Tol | W | n | Fr kN |
||
| 16 | 1.0 | +0.00 -0.06 |
14.7 | +0.10 -0.36 |
23.4 | 2.3 | 3.5 | 1.7 | 7.0 | 15.2 | +0.00 -0.11 |
1.1 | 1.2 | 3.26 | AKM0160 |
| 17 | 1.0 | 15.7 | 24.6 | 2.3 | 3.6 | 1.7 | 8.0 | 16.2 | 1.1 | 1.2 | 3.46 | AKM0170 | |||
| 18 | 1.2 | 16.5 | 25.8 | 2.4 | 3.7 | 2.0 | 17.0 | 17.0 | 1.3 | 1.5 | 3.46 | AKM0180 | |||
| 19 | 1.2 | 17.5 | 26.8 | 2.5 | 3.7 | 2.0 | 17.0 | 18.0 | 1.3 | 1.5 | 4.84 | AKM0190 | |||
| 20 | 1.2 | 18.5 | +0.13 -0.42 |
28.0 | 2.6 | 3.8 | 2.0 | 17.1 | 19.0 | +0.00 -0.13 |
1.3 | 1.5 | 5.06 | AKM0200 | |
| 22 | 1.2 | 20.5 | 30.4 | 2.8 | 4.0 | 2.0 | 16.9 | 21.0 | 1.3 | 1.5 | 5.65 | AKM0220 | |||
| 23 | 1.2 | 21.5 | +0.21 -0.42 |
31.6 | 2.9 | 4.1 | 2.0 | 16.6 | 22.0 | +0.00 -0.21 |
1.3 | 1.5 | 5.90 | AKM0230 | |
| 24 | 1.2 | 22.5 | 32.8 | 3.0 | 4.2 | 2.0 | 16.1 | 22.9 | 1.3 | 1.7 | 6.75 | AKM0240 | |||
| 25 | 1.2 | 23.2 | 34.0 | 3.0 | 4.3 | 2.0 | 16.2 | 23.9 | 1.3 | 1.7 | 7.05 | AKM0250 | |||
| 26 | 1.2 | 24.2 | 35.2 | 3.1 | 4.4 | 2.0 | 16.1 | 24.9 | 1.3 | 1.7 | 7.34 | AKM0260 | |||
| 28 | 1.5 | 25.9 | 37.5 | 3.2 | 4.5 | 2.0 | 32.1 | 26.6 | 1.6 | 2.1 | 10.00 | AKM0280 | |||
| 30 | 1.5 | 27.9 | 39.9 | 3.5 | 4.7 | 2.0 | 32.1 | 26.6 | 1.6 | 2.1 | 10.73 | AKM0300 | |||
| 32 | 1.5 | 29.6 | 42.5 | 3.6 | 5.0 | 2.5 | 31.2 | 30.3 | +0.00 -0.25 |
1.6 | 2.6 | 13.85 | AKM0320 | ||
| 35 | 1.5 | 32.2 | +0.25 -0.50 |
45.9 | 3.9 | 5.2 | 2.5 | 30.8 | 33.0 | 1.6 | 3.0 | 17.8 | AKM0350 | ||
| 38 | 1.75 | 35.2 | 49.6 | 4.2 | 5.5 | 2.5 | 49.5 | 36.0 | 1.85 | 3.0 | 19.3 | AKM0380 | |||
| 40 | 1.75 | 36.5 | +0.39 -0.90 |
55.1 | 4.4 | 7.2 | 2.5 | 51.0 | 37.5 | 1.85 | 3.8 | 25.3 | AKM0400 | ||
| 42 | 1.75 | 38.5 | 57.1 | 4.5 | 7.2 | 2.5 | 50.0 | 39.5 | 1.85 | 3.8 | 26.7 | AKM0420 | |||
| 45 | 1.75 | 41.5 | 60.1 | 4.7 | 7.2 | 2.5 | 49.0 | 42.5 | 1.85 | 3.8 | 28.6 | AKM0450 | |||
| 47 | 1.75 | 43.5 | 62.1 | 4.9 | 7.2 | 2.5 | 49.5 | 44.5 | 1.85 | 3.8 | 30.0 | AKM0470 | |||
| 48 | 1.75 | 44.5 | 63.1 | 5.0 | 7.2 | 2.5 | 49.4 | 45.5 | 1.85 | 3.8 | 30.7 | AKM0480 | |||
| 50 | 2.0 | +0.00 -0.07 |
45.8 | 67.2 | 5.1 | 8.2 | 2.5 | 73.3 | 47.0 | 2.15 | 4.5 | 38.0 | AKM0500 | ||
| 55 | 2.0 | 50.8 | +0.46 -1.10 |
72.2 | 5.4 | 8.2 | 2.5 | 71.4 | 52.0 | +0.25 -0.50 |
2.15 | 4.5 | 42.0 | AKM0550 | |
| 57 | 2.0 | 52.8 | 74.2 | 5.5 | 8.2 | 2.5 | 70.9 | 54.0 | 2.15 | 4.5 | 43.7 | AKM0570 | |||
| 58 | 2.0 | 53.8 | 75.2 | 5.6 | 8.2 | 2.5 | 71.1 | 55.0 | 2.15 | 4.5 | 44.3 | AKM0580 | |||
| 60 | 2.0 | 55.8 | 77.2 | 5.8 | 8.2 | 3.0 | 69.2 | 57.0 | 2.15 | 4.5 | 46.0 | AKM0600 | |||
| 62 | 2.0 | 57.8 | 79.2 | 6.0 | 8.2 | 3.0 | 69.3 | 59.0 | 2.15 | 4.5 | 47.5 | AKM0620 | |||
| 65 | 2.5 | 60.8 | 86.4 | 6.3 | 10.2 | 3.0 | 135.6 | 62.0 | 2.65 | 4.5 | 49.8 | AKM0650 | |||
| 67 | 2.5 | 62.5 | 88.4 | 6.4 | 10.2 | 3.0 | 136.1 | 64.0 | 2.65 | 4.5 | 51.3 | AKM0670 | |||
| 68 | 2.5 | 63.5 | 89.4 | 6.5 | 10.2 | 3.0 | 135.9 | 65.0 | 2.65 | 4.5 | 52.2 | AKM0680 | |||
| 70 | 2.5 | 65.5 | 91.4 | 6.6 | 10.2 | 3.0 | 134.2 | 67.0 | 2.65 | 4.5 | 52.2 | AKM0700 | |||
| 75 | 2.5 | 70.5 | 96.4 | 7.0 | 10.2 | 3.0 | 130.0 | 72.0 | 2.65 | 4.5 | 57.6 | AKM0750 | |||
| 80 | 2.5 | 74.5 | 101.4 | 7.4 | 10.2 | 3.0 | 128.4 | 76.5 | 2.65 | 5.3 | 71.6 | AKM0800 | |||
| 85 | 3.0 | +0.00 -0.08 |
79.5 | 106..4 | 7.8 | 10.2 | 3.5 | 215.4 | 81.5 | +0.00 -0.35 |
3.15 | 5.3 | 76.2 | AKM0850 | |
| 90 | 3.0 | 84.5 | +0.00 -0.08 |
111.4 | 8.2 | 10.2 | 3.5 | 217.2 | 86.5 | 3.15 | 5.3 | 80.8 | AKM0900 | ||
| 95 | 3.0 | 89.5 | 116.4 | 8.6 | 10.2 | 3.5 | 212.2 | 91.5 | 3.15 | 5.3 | 85.5 | AKM0950 | |||
| 100 | 3.0 | 94.5 | 121.4 | 9.0 | 10.2 | 3.5 | 206.4 | 96.5 | 3.15 | 5.3 | 90.0 | AKM1000 | |||
Circlips and Retaining Rings Index | Contact Springmasters with your specifications.
