Standard Internal Circlips: To DIN 472 Metric
The most common form of axially fitted circlips for bores with grooves.
The circlip has a large free diameter and gap width, consequently it fits more tightly into the groove and provides higher and more uniform thrust load capacity. Lugs with holes are provided for rapid fitting or removal with circlip pliers.
Standard material: Carbon Spring Steel – Standard Finish: Phosphate and Oil.
Key to table headings and abbreviations.
Most sizes over 170mm are without lugs. Measurements in mm & kN.
Also Available: Standard Internal Circlips: N1300 American Specification
Display Price: Per 100 unitsPer single unit Per 100 unitsPer single unit
|Name||Bore (B)||Thick (t)||Thickness Tolerance||Free Diameter (D)||Clearance on Bore (Cb)||Beam (b)||Lug (L)||Hole Diamter (h)||Ring Load Carrying Capacity (kN)||Groove Diameter (G)||Groove Tolerance||Groove Width (W)||Edge Margin (n)||Groove Load Capacity||Price 1-249||Price 250-999||Price 1000-4999||Price 5000-9999||Price 10000+||Buy|